Differences

This shows you the differences between two versions of the page.

--- rfc:closures [2008/07/03 09:47]
rquadling Typos
+++ rfc:closures [2017/09/22 13:28]
@@ Line 1: / Line 1: @@
-====== Request for Comments: Lambda functions and closures ======
-  * Version: 1.2
-  * Date: 2008-07-01
-  * Author: Christian Seiler <chris_se@gmx.net>, Dmitry Stogov <dmitry@zend.com>
-  * Status: Under Discussion
-This RFC discusses the introduction of compile-time lambda functions and closures in PHP.
-===== Introduction =====
-End of 2007 a patch was proposed that would add lambda functions (but without closures) to PHP. During the discussion on the mailing list, several people suggested that without support for closures, lambda functions are not useful enough to add them to PHP. This proposal describes a viable method of adding lambda functions with closure support to PHP.
-The initial posting of this proposal has created quite a bit of discussion on the list. This updated proposal including an updated patch intends to incorporate the result of that discussion. A lot of changes to the original patch by Christian Seiler were made by Dmitry Stogov.
-===== Why do we need closures and lambda functions? =====
-Closures and lambda functions can make programming much easier in several ways:
-==== Lambda Functions ====
-Lambda functions allow the quick definition of throw-away functions that are not used elsewhere. Imaging for example a piece of code that needs to call preg_replace_callback(). Currently, there are three possibilities to achieve this:
-   - Define the callback function elsewhere. This distributes code that belongs together throughout the file and decreases readability.
-   - Define the callback function in-place (but with a name). In that case one has to use function_exists() to make sure the function is only defined once. Here, the additional if() around the function definition makes the source code difficult to read. Example code:
-<code php>
-   function replace_spaces ($text) {
-     if (!function_exists ('replace_spaces_helper')) {
-       function replace_spaces_helper ($matches) {
-         return str_replace ($matches[1], ' ', '&nbsp;').' ';
-       }
-     }
-     return preg_replace_callback ('/( +) /', 'replace_spaces_helper', $text);
-   }
-</code>
-   - Use the present create_function() in order to create a function at runtime. This approach has several disadvantages: First of all, syntax highlighting does not work because a string is passed to the function. It also compiles the function at run time and not at compile time so opcode caches can't cache the function.
-==== Closures ====
-Closures provide a very useful tool in order to make lambda functions even more useful. Just imagine you want to replace 'hello' through 'goodbye' in all elements of an array. PHP provides the array_map() function which accepts a callback. If you don't wan't to hard-code 'hello' and 'goodbye' into your sourcecode, you have only four choices:
-   - Use create_function(). But then you may only pass literal values (strings, integers, floats) into the function, objects at best as clones (if var_export() allows for it) and resources not at all. And you have to worry about escaping everything correctly. Especially when handling user input this can lead to all sorts of security issues.
-   - Write a function that uses global variables. This is ugly, non-reentrant and bad style.
-   - Create an entire class, instantiate it and pass the member function as a callback. This is perhaps the cleanest solution for this problem with current PHP but just think about it: Creating an entire class for this extremely simple purpose and nothing else seems overkill.
-   - Don't use array_map() but simply do it manually (foreach). In this simple case it may not be that much of an issue (because one simply wants to iterate over an array) but there are cases where doing something manually that a function with a callback as parameter does for you is quite tedious.
-Note: str_replace also accepts arrays as a third parameter so this example may be a bit useless. But imagine you want to do a more complex operation than simple search and replace.
-===== Common misconceptions =====
-   - Lambda functions / closures are **not** a way of dynamically extending classes by additional methods at runtime. There are several other possibilities to do this, including the already present __call semantic.
-   - PHPs notion of scope is quite different than the notion of scope other languages define. Combine this with variable variables ($$var) and it becomes clear that automatically detecting which variables from the outer scope are referenced inside are closure is impossible. Also, since for example global variables are not visible inside functions either by default, automatically making the parent scope available would break with the current language concept PHP follows.
-===== Proposal and Patch =====
-The following proposal and patch implement compile-time lambda functions and closures for PHP while keeping the patch as simple as possible.
-==== Userland perspective ====
-=== Lambda function syntax ===
-The patch adds the following syntax as a valid expression:
-<code php>
-   function & (parameters) use (lexical vars) { body }
-</code>
-The & is optional and indicates that the function should return a refernce. The use followed by the paranthesis is optional and indicates that several variables from the current scope should be imported into the closure.
-Example usage:
-<code php>
-   $lambda = function () { echo "Hello World!\n"; };
-</code>
-The variable $lambda then contains a callable resource that may be called through different means:
-<code php>
-   $lambda ();
-   call_user_func ($lambda);
-   call_user_func_array ($lambda, array ());
-</code>
-This allows for simple lambda functions, for example:
-<code php>
-   function replace_spaces ($text) {
-     $replacement = function ($matches) {
-       return str_replace ($matches[1], ' ', '&nbsp;').' ';
-     };
-     return preg_replace_callback ('/( +) /', $replacement, $text);
-   }
-</code>
-=== Closure support ===
-In order to make use of variables defined in the parent scope, this patch proposes the following syntax to import variables from the parent scope into the closure scope:
-<code php>
-  function (normal parameters) use ($var1, $var2, &$refvar) {}
-</code>
-The variables $var1, $var2 and $refvar defined in the parent scope will be visible inside the lambda function. For the behaviour with regard to references, see below.
-Simple example:
-<code php>
-   function replace_in_array ($search, $replacement, $array) {
-     $map = function ($text) use ($search, $replacement) {
-       if (strpos ($text, $search) > 50) {
-         return str_replace ($search, $replacement, $text);
-       } else {
-         return $text;
-       }
-     };
-     return array_map ($map, array);
-   }
-</code>
-The variables $search and $replacement are variables in the scope of the function replace_in_array() and they are imported into the scope of the closure upon creation of the closure.
-=== Closure lifetime ===
-Closures may live longer as the methods that declared them. It is perfectly possible to have something like this:
-<code php>
-   function getAdder($x) {
-     return function ($y) use ($x) {
-       // or: lexical $x;
-       return $x + $y;
-     };
-   }
-</code>
-=== Refernces vs. Copies ===
-By default, all imported variables are copied as values into the closure. This makes it impossible for a closure to modify the variable in the parent scope. By prepending an & in front of the variable name in the use declaration, the variable is imported as a refernce instead. In that case, changes to the variable inside the closure will affect the outside scope.
-Example:
-<code php>
-  $x = 1;
-  $lambda1 = function () use ($x) {
-    $x *= 2;
-  };
-  $lambda2 = function () use (&$x) {
-    $x *= 3;
-  };
-  $lambda1 ();
-  var_dump ($x); // gives: 1
-  $lambda2 ();
-  var_dump ($x); // gives: 3
-</code>
-Support for references are necessary in order to achieve true closures (like in Javascript, where a variable originating in parent scope can be modified by closures) while copying per default fits best with the current semantics of PHP and does not cause headaches in loops (for example, when importing a loop index into a closure).
-=== Interaction with OOP ===
-If a closure is defined inside an object, the closure has full access to the current object through $this (without the need to import it explicitely) and all private and protected methods of that class. This also applies to nested closures. Example:
-<code php>
-     class Example {
-       private $search;
-       public function __construct ($search) {
-         $this->search = $search;
-       }
-       public function setSearch ($search) {
-         $this->search = $search;
-       }
-       public function getReplacer ($replacement) {
-         return function ($text) use ($replacement) {
-           return str_replace ($this->search, $replacement, $text);
-         };
-       }
-     }
-     $example = new Example ('hello');
-     $replacer = $example->getReplacer ('goodbye');
-     echo $replacer ('hello world'); // goodbye world
-     $example->setSearch ('world');
-     echo $replacer ('hello world'); // hello goodbye
-</code>
-As one can see, defining a closure inside a class method does not change the semantics at all - it simply does not matter if a closure is defined in global scope, within a function or within a class method. The only small difference is that closures defined in class methods may also access the class and the current object via $this. Since $this is saved "within the closure" the corresponding object will live at least as long as the closure.
-Because not all closures defined in class methods need $this, it is possible to declare a lambda function to be static:
-<code php>
-     class Example {
-       public function doSomething () {
-         $x = 4;
-         $closure = static function ($y) use ($x) {
-           return = $x + $y;
-         };
-         return $closure (6);
-       }
-     }
-</code>
-In this case, $this is not available inside the closure. This may save a lot of memory if saves many closures that originated in longer needed objects.
-==== Additional goody: _ _invoke ====
-Since closures implement a new type of variable that may be called dynamically (i.e. objects), the idea came up that generic callable could also be implemented. This patch adds an additional magic method _ _invoke that may be defined in arbitrary classes. If defined, the object itself is callable and the new special method will be invoked instead of the object. Example:
-<code php>
-class Example {
-  public function __invoke () {
-    echo "Hello World!\n";
-  }
-}
-$foo = new Example;
-$foo ();
-</code>
-==== Interaction with reflection ====
-Since closures are anonymous, they do **not** appear in reflection.
-However, a new method was added to the ReflectionMethod and ReflectionFunction classes: getClosure. This method returns a dynamically created closure for the specified function. Example:
-<code php>
-class Example {
-  static function printer () { echo "Hello World!\n"; }
-}
-$class = new ReflectionClass ('Example');
-$method = $class->getMethod ('printer');
-$closure = $method->getClosure ();
-$closure ();
-</code>
-This example dynamically creates a callable object of the static method "printer" of the "Example" class. Calling that closure is like calling the method directly. This also works for non-static methods - here getClosure expects a single parameter for the $this pointer:
-<code php>
-class Example {
-  public $x = 4;
-  function printer () { echo "Hello World: $this->x!\n"; }
-}
-$class = new ReflectionClass ('Example');
-$method = $class->getMethod ('printer');
-$object = new Example;
-$closure = $method->getClosure ($object);
-$closure ();
-$object->x = 5;
-$closure ();
-</code>
-==== Zend internal perspective ====
-The patch basically changes the following in the Zend engine:
-When the compiler reaches a lambda function, except for details in the grammar, a new function zend_do_begin_lambda_function_declaration is called - which itself calls zend_do_begin_function_declaration with "lambda" as a predefined function name. Immediately hereafter, the ZEND_DECLARE_FUNCTION opcode is replaced with a new ZEND_DECLARE_LAMBDA_FUNCTION opcode, early binding will therefore never occur for lambda functions (and traditional function binding at runtime neither, since the ZEND_DECLARE_LAMBDA_FUNCTION opcode does something else, see below). The closure has an additional flag ZEND_ACC_CLOSURE.
-Lexical variables are done via static variables: For each lexical variable an entry in the static variables hash table is added. The entry is default NULL but an additional IS_LEXICAL or IS_LEXICAL_REF is XORed to the zval type.
-An additional internal class "Closure" is added which will be used for saving closures.
-The ZEND_DECLARE_LAMBDA_FUNCTION opcode looks up the function in the function table (it still has its runtime function key the compiler gave it and is thus cacheable by any opcode cache), creates a new object of the Closure type and stores a copy of the op_array inside. It correctly sets the scope of the copied op_array to be the current class scope and makes sure all lexical variables are imported from the parent scope into the copied hash table of the new op_array. It also creates a reference to the current $this object. It returns the newly created object.
-Some hooks were added to the opcode handlers, zend_call_function and zend_is_callable_ex that allow the 'Closure' object to be called.
-In order to make code changes as clean as possible, this logic was mainly abstracted into zend_closures.c which defines two main methods: zend_create_closure and zend_get_closure. zend_create_closure creates a new closure, zend_get_closure retrieves the associated op_array, scope and this pointer from the closure. If some logic needs to be changed (due to design decisions or - for example - a bug), no binary incompatible change will take place but rather those two methods need to be changed.
-==== Tests ====
-The patch contains additional phpt tests that make sure closures work as designed.
-==== The patch ====
-Current patches:
-   * [[http://www.christian-seiler.de/temp/closures-php-5.3-2008-07-01-1.diff|Patch against PHP_5_3]]
-   * [[http://www.christian-seiler.de/temp/closures-php-6.0-2008-07-01-1.diff|Patch against HEAD]]
-Older patches for completeness:
-   * [[http://www.christian-seiler.de/temp/closures-php-5.3-2008-06-26-use.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-5.3-2008-06-26-use-this.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-5.3-2008-06-26-lexical-this.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-6.0-2008-06-26-use.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-6.0-2008-06-26-use-this.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-6.0-2008-06-26-lexical-this.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-5.3-2008-06-17-3.diff]]
-   * [[http://www.christian-seiler.de/temp/closures-php-5.3-2008-06-16-1.diff]]
-**Note** The patch does not contain the diff for ''zend_language_scanner.c'' since that file can easily be regenerated from ''zend_language_scanner.l''.
-==== BC breaks ====
-   * None by design. A new previously invalid syntax is added. No additional keywords are defined.
-==== Caveats / possible WTFs ====
-=== Trailing '';'' ===
-On writing ''$func = function () { };'' there is a semicolon necessary. If left out it will produce a compile error. Since any attempt to remove that necessity would unecessarily bloat the grammar, I suggest we simply keep it the way it is. Also, Lukas Kahwe Smith pointed out that a single trailing semicolon after a closing brace already exists: ''do { } while ();''
-=== Misinterpretations of the goal of closures ===
-As the discussion on the mailing list showed, there were quite a few misconceptions on what closures may or may not achieve. One often used suggestion was to use closures in order to extend classes by additional methods at run time. This is **not** the goal of closures **and** it can already be achieved without closures just by using _ _call, see for example [[http://phpfi.com/328105]].
-===== Changelog ====
-   * 2008-07-01 Christian Seiler: Updated patch yet again
-   * 2008-06-26 Christian Seiler: Revised patch, using objects instead of resources, added tests
-   * 2008-06-18 Christian Seiler: OOP clarifications
-   * 2008-06-17 Christian Seiler: Updated patch
-   * 2008-06-17 Christian Seiler: Clarified interaction with OOP
-   * 2008-06-16 Christian Seiler: Small changes
-   * 2008-06-16 Christian Seiler: Initial creation

Differences

Page Tools