pecl:mysqlnd_ms

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
pecl:mysqlnd_ms [2012/04/17 12:01] – [Raw Bin ideas (RFCs)] uwpecl:mysqlnd_ms [2017/09/22 13:28] (current) – external edit 127.0.0.1
Line 157: Line 157:
  
 === 1.4 - Tweaking based on user feedback  === === 1.4 - Tweaking based on user feedback  ===
 +
 +== Coding/Features ==
 +
 +  * [done] More fail over options
 +    * [done] Automatic on-connect fail over, if activated, shall be done in a loop until a connection can be opened. Currently we stop after the first attempt. If automatic fail over is on, we try "next" and in case of a failure of "next" we stop. With the new logic there shall be no stop until all possible "next" have been tried.
 +    * [done] Remember failed hosts for the duration of a web request (the plugins' typical lifespan)
 +
 +  * [done] Refine QoS session consistency server selection policy
 +    * [done] Support "wait for GTID". Currently we loop over all servers until we find a matching one. MySQL 5.6 allows SQL users either to fetch the latest GTID or SQL users can ask for a GTID and their request will block until the GTID has been replicated on the server. We should support the latter logic as well.
 +
 +  * [done] Improve load balancing
 +    * [done] Allow users to set a ratio/weight for query distribution. There may be machines in a cluster/config which can handle twice as many requests as others. Such machines shall be given a weight of, for example, two to indicate that the load balancer shall direct twice as many requests to them as to a machine with the weight of one.
 + 
 +== QA ==
 +
 +  * [done] 85-90% code coverage through tests
 +
 +== Documentation, Blogs, Articles etc. ===
 +
 +  * [done] Update documentation
 +  * [done] Assorted blog postings
 +
 +=== 1.5 - Tweaking based on user feedback  ===
 +
 +Work has not started yet.
  
 == Coding/Features == == Coding/Features ==
Line 163: Line 188:
     * [open] Silent and automatic connection fail over if server returns configured error code     * [open] Silent and automatic connection fail over if server returns configured error code
       * NOTE: this may require refactoring of four filters.        * NOTE: this may require refactoring of four filters. 
-    * [open] Automatic on-connect fail over, if activated, shall be done in a loop until a connection can be opened. Currently we stop after the first attempt. If automatic fail over is on, we try "next" and in case of a failure of "next" we stop. With the new logic there shall be no stop until all possible "next" have been tried.+    * [open] Add failover timeout and failover (maximum) attempts limits/configuration settings
  
   * [open] Support directing statements manually to a group of nodes for more efficient server cache usage   * [open] Support directing statements manually to a group of nodes for more efficient server cache usage
-  * [open] Refine QoS session consistency server selection policy 
-    * [open] Support "wait for GTID". Currently we loop over all servers until we find a matching one. MySQL 5.6 allows SQL users either to fetch the latest GTID or SQL users can ask for a GTID and their request will block until the GTID has been replicated on the server. We should support the latter logic as well. 
     * [open] Remember the most current server and test this one first when searching for a GTID (a synchronous server). Use of cached information is possible for the duration of a read-only request sequence. The cache must be flushed and refreshed for every write.     * [open] Remember the most current server and test this one first when searching for a GTID (a synchronous server). Use of cached information is possible for the duration of a read-only request sequence. The cache must be flushed and refreshed for every write.
- 
-  * [open] Improve load balancing 
-    * [open] Allow users to set a ratio/weight for query distribution. There may be machines in a cluster/config which can handle twice as many requests as others. Such machines shall be given a weight of, for example, two to indicate that the load balancer shall direct twice as many requests to them as to a machine with the weight of one. 
  
   * [open] Work with php.net Windows team to provide PECL/mysqlnd_ms windows builds   * [open] Work with php.net Windows team to provide PECL/mysqlnd_ms windows builds
 +    * Ensure the code builds
 +    * Encourage Windows team to create builds
    
 == QA == == QA ==
Line 184: Line 206:
   * [open] Update documentation   * [open] Update documentation
   * [open] Assorted blog postings   * [open] Assorted blog postings
- 
-=== Open and delayed tasks === 
- 
-== Coding/Features == 
-  
-  * [incomplete - 1.2] make load balancer schemata aware 
-    * for each statement detect database/table 
-    * follow schemata based partitioning rules  
-    * basic idea: http://blog.ulf-wendel.de/?p=310 
-    * cancelled/delayed: SQL parser is not stable and can crash plugin 
-  * [cancelled] improve trx_stickiness using MYSQL*/MYSQLND* in_transaction flag 
-    * cancelled: http://blog.ulf-wendel.de/?p=313 - No protocol flag for transaction aware load balancing 
-  * [open] bail on unknown config settings. For example, bail if someone uses round_robin instead of roundrobin 
- 
-== QA ==  
- 
-  * [open] >= 90% code coverage through tests 
-  * [open] write report on parsing overhead, goal: <5% in worst case micro benchmarks 
- 
-== Documentation, Blogs, Articles etc. == 
- 
-  * [done] impact of connection limits such as allow_persistent, max_persistent, max_links 
  
  
Line 216: Line 216:
 == Feature description == == Feature description ==
  
-=== Eventual consistent: automatic chaining of PECL/mysqlnd_qc query cache ===+=== More fail over configuration options ===
 == Problem to solve / Idea == == Problem to solve / Idea ==
  
-MySQL replication is asynchronous. Slaves are //eventual consistent// because there is a time lag between an update on the master and the ability of all clients to read that update from the slaves. Slaves may serve stale data. +Whenever the plugin tries to connect to a node it may fail to do so. Connection attempts can be made when opening a connection or later, when executing a statement (lazy connections). By default the plugin bails out if the connection attempt fails. To make using the plugin as transparent as possible it is possible to optionally enable automatic fail over in case of failed connection attempts.
- +
-MySQL replication used for read scale-out requires applications to be able to cope with stale data. If stale data is acceptable, a replication system may replace a MySQL slave read access with an access to a local, eventually stale, cache. **The cache access will lower network latency resulting in faster reply to the query. Furthermore, it will reduce the load on the MySQL replication slaves, thus requiring less machines for a given read workload.** +
- +
-For certain queries, PECL/mysqlnd_ms shall automatically populate a local cache and fetch results from the cache. PECL/mysqlnd_ms shall use PECL/mysqlnd_qc, if possible, in a transparent way. +
- +
-(MySQL semi-synchronous replication does not change the matter as it requires only one slave to have received but not yet applied the update.)+
  
-**PECL/mysqlnd_qc supports Memcache, APC and other storage media.**+The fail over logic itself is basic. Smaller improvements will make it much more capable.
  
 == Feature description == == Feature description ==
  
-Applications shall be able to define a "quality of service" (the term is borrowed from Tungsten) for a statement, a connection or globally. The "quality of service" shall be guaranteed by PECL/mysqlnd_ms. The service level defines if //eventual consistency// is allowed: 
  
-  * [RW_]CONSISTENT +Automatic fail over is basic. We shall:
-  * [RO_]EVENTUAL_CONSISTENT+
  
-With CONSISTENT every statement shall be run on the master to avoid stale data. EVENTUAL_CONSISTENT allows the use of slaves and thus, stale, non-consistent data may be read.+ - make it configurable whether fail over node search tries one or all possible alternatives 
 + - link fail over to certain error codes 
 + - remember failed hosts to skip them for the rest of the web request
  
-PECL/mysqlnd_ms supports the logic of service levels already as of 1.0.0, but does not call them that way. PECL/mysqlnd_ms features SQL hints (USE_MASTER) to enforce the use of the master (CONSISTENT), the use of the last used server (USE_LAST_USED) for consistent reads from slaves (CONSISTENT) and has an ini-setting (master_on_write) to automatically use only the master after the first write (CONSISTENT). It also features the concept of EVENTUAL_CONSISTENT which is the default operation mode. +Up to version 1.3 the automatic fail over stops after trying one alternative. For example, if a connection to A fails we try B. If connecting to B fails we stop and bail out. In that case the user must handle the error although there may be node C and D, ... which could be used. In the future the search for an alternative shall not stop after B but continue until a connection has been established or there are no alternatives. If a connect to A fails, the plugin shall try B, C, D and so forth. Automatic fail over, automatic connection attempts shall not stop after trying B and failing to connect to B. 
- +
-However, PECL/mysqlnd_ms does not call it "quality of service" and has not extra API calls for setting the service level. It may be convenient to introduce an extra API call, which removes the need of having to prefix statements with SQL hint. Prefixing is inconvenient. +
- +
-  /* Force use of master - consistent read although no SQL hint is used */ +
-  mysqlnd_ms_set_service_level($link, CONSISTENT); +
-  $link->query("SELECT ..."); +
-  $link->query("SELECT ..."); +
-   +
-  /* Use master or slaves for reads - allow read stale, non-consistent data is acceptable */   +
-  mysqlnd_ms_set_service_level($link, EVENTUAL_CONSISTENT); +
-  $link->query("SELECT ..."); +
-   +
-The service level EVENTUAL_CONSISTENT can be combined with automatic, local caching. It shall be configurable if and for which queries caching shall be used. Configuration can, for example, be done via the PECL/mysqlnd_ms plugin configuration file. It may be also useful to introduce a EVENTUAL_CONSISTENT_CACHE service level to control caching via API call. +
- +
-If PECL/mysqlnd_ms runs in caching mode, it shall automatically populate and read from the PECL/mysqlnd_qc query cache. PECL/mysqlnd_qc is TTL based. The TTL could either be set manually via PECL/mysqlnd_ms function call, globally in the PECL/mysqlnd_ms configuration file or automatically derived from SHOW SLAVE STATUS Seconds_Behind_Master.  +
- +
-Use and integration of PECL/mysqlnd_qc shall be as transparent as possible from an applications point of view. For example, PECL/mysqlnd_ms shall inject all SQL hints required to control caching by PECL/mysqlnd_qc. +
- +
- +
-=== Global Transaction ID === +
-== Problem to solve / Idea == +
- +
-In the scope of MySQL master - slave replication global transaction IDs can be understood as a measure to identify a database state. Replicas/slaves can use global transaction ids to identify change sets (from the master) that need to be applied. Clients can use global transaction ids to monitor the replication status of the replicas in the database cluster. +
- +
-The MySQL built-in replication does not feature global transaction IDs. MySQL replication uses transaction log files and log file positions to identify change sets that replicas (slaves) need to apply. Log file and log file position are local to a machine. A tuple of (log file, log file position) does not uniquely identify a change set in the whole cluster. +
- +
-If, for example, your setup is A -> B -> C (A is the master, B is a slave reading from A, C is a slave reading from B) and B fails you are faced with the challenge to identify the log file and log file position on A from which C shall continue to read and apply change sets. C cannot continue reading from the same (log file, log position) as it was reading from B. The tuple (log file=2, log position=17) on B can identify a different change set than the tuple (log file=2, log position=17) on A. C might get out of sync, loose change sets or apply them multiple times, if it would blindly continue reading from the same position on A.  +
- +
-Today, it can become a bit of a time consuming guessing game to identify the next change set that B needs to process in this fail-over example.  +
- +
-Fail-over and circular-replication is much easier to do if the database cluster maintains a global transaction ID.  +
- +
-The plugin shall inject SQL to manually maintain a global transaction ID on the master.  +
- +
-== Feature description == +
- +
-Global transaction IDs can be used for multiple purposes: +
- +
-  * Simplify server fail-over (server-side, not client-side) +
- +
-  * Monitor slave replication status (client-side, plugin relevant) +
-    * Identify "up-to-date" slave for "synchronous" reads +
-    * Identify slaves which are "recent enough" (quality of service) +
-    * Let the load balancer skip slaves which have fallen to far behind to reduce their load +
- +
-The plugin shall support using a global transaction ID for: +
- +
-  - server fail-over (e.g. promoting new master after master failure)  +
-  - selection of "recent enough" (quality of service) slaves for reading +
- +
-Gobal transaction ID generation shall be done by SQL injection. The plugin shall insert SQL at the end of each (write) transaction (see http://jan.kneschke.de/projects/mysql/mysql-proxy-and-a-global-transaction-id/) on the master. The inserted SQL shall generate an ID which helps with the desired use cases. +
- +
-The SQL used for globals transaction ID generation can be different for the different purposes. It may be good enough to inject SET @_g_trx_id=UUID_SHORT() on the master before a SQL transaction commits to help with fail-over. Whereas the selection of slaves of a certain state ("up-to-date, "recent enough") may require maintaining a sequence number or a tuple of server-id and sequence number. Cluster topology and replication method (statement based, row based, mixed).  +
- +
-Thus, the user shall be able to configure: +
- +
-  * SQL used for ID generation +
-  * SQL used to retrieve ID  +
- +
-If no SQL is given to retrieve the ID, the plugin does not feature '2) selection of "recent enough" (quality of service) slaves for reading'. If given, the user can restrict the choice of slaves for reading by setting a minimum global transaction id which has to be already replicated on the slaves.  +
- +
-This is useful if, for example, an application does a write and needs to read the modified data "immediately" after the write. Not all slaves my have replicated the write "immediately". Thus, the read can only be performed on the master or some, selected slaves which have replicated the changes already. Using a global transaction id it is possible to identify those slaves. +
- +
-  /* write to master */ +
-  $link->query("INSERT ..."); +
-  $write_trx_id = mysqlnd_ms_get_last_global_transaction_id(); +
-   +
-  /* Force use of master - consistent read although no SQL hint is used */ +
-  mysqlnd_ms_set_service_level($link, CONSISTENT); +
-  $link->query("SELECT ..."); +
-  $link->query("SELECT ..."); +
-    +
-  /* Read from a slave which has replicated global transaction ID or, if no slave found, use master */ +
-  mysqlnd_ms_set_service_level($link, MIN_GLOBAL_TRX_ID, $write_trx_id); +
-  $link->query("SELECT ..."); +
-  $link->query("SELECT ..."); +
-   +
-  /* Use master or slaves for reads - allow read stale, non-consistent data is acceptable */   +
-  mysqlnd_ms_set_service_level($link, EVENTUAL_CONSISTENT); +
-  $link->query("SELECT ..."); +
- +
-The global transaction ID feature of the plugin is turned off by default. The feature is seen as an experts topic. +
- +
-=== mysqlnd_ms_change_user() === +
-== Problem to solve / Idea == +
- +
-Give users a way to overrule all automatic decisions, including the use of host credentials from the config when broadcasting COM_CHANGE_USER after mysqlnd_change_user(master_user, master_pass, master_db). +
- +
-== Feature description == +
- +
-  bool mysqlnd_ms_change_user(mixed $connection, mixed $where, $user, $password, $db) +
-   +
-  $where: MYSQLND_MS_ALL_CONNECTIONS, MYSQLND_MS_LAST_USED_CONNECTION +
-   +
-Consider:  +
- +
-  $where: MYSQLND_MS_ALL_CONNECTIONS, MYSQLND_MS_LAST_USED_CONNECTION, name of server +
- +
-=== mysqlnd_ms_get_errors() === +
-== Problem to solve / Idea == +
- +
-Not all MS errors can be bubbled up through the standard APIs. For example, failing to parse parts of the MS config may result in connection error. Upon connect, the user will get the error code  for the failed connect. However, the failure to parse the config, the cause of the problem, is only shown as a warning. +
- +
-== Feature description == +
- +
-  array mysqlnd_ms_get_errors([mixed $connection]) +
-   +
-TDB. +
- +
-=== More fail over configuration options === +
-== Problem to solve / Idea == +
- +
-Whenever the plugin tries to connect to a node it may fail to do so. Connection attempts can be made when opening a connection or later, when executing a statement (lazy connections). By default the plugin bails out if the connection attempt fails. To make using the plugin as transparent as possible it is possible to optionally enable automatic fail over in case of failed connection attempts. +
- +
- +
-== Feature description == +
- +
-Up to version 1.3 the automatic fail over stops after trying one alternative. For example, if a connection to A fails we try B. If connecting to B fails we stop and bail out. In that case the user must handle the error although there may be node C and D, ... which could be used. +
- +
-In the future the search for an alternative shall not stop after B but continue until a connection has been established or there are no alternatives. If a connect to A fails, the plugin shall try B, C, D and so forth. Automatic fail over, automatic connection attempts shall not stop after trying B and failing to connect to B. +
  
 Whether this shall become a new default or become configurable is to be decided. Whether this shall become a new default or become configurable is to be decided.
  
 Furthermore, it shall be possible to link the automatic fail over to certain error codes: if A returns error n, try next. If A returns m, stop the search and bail out. This way we can differentiate between a server that rejects new requests, e.g. because its overloaded, and a server that has failed. Furthermore, it shall be possible to link the automatic fail over to certain error codes: if A returns error n, try next. If A returns m, stop the search and bail out. This way we can differentiate between a server that rejects new requests, e.g. because its overloaded, and a server that has failed.
 +
 +Upon request the plugin will remember failed nodes for the duration of a web request. If connecting to a node has failed once no further attempts will be made to connect to the node. This may lead to situations where nodes are skipped although they became available again in the meantime. This is ignore because most web requests are short-lived.
  
 === Support directing statements manually to a group of nodes for more efficient server cache usage === === Support directing statements manually to a group of nodes for more efficient server cache usage ===
pecl/mysqlnd_ms.1334664115.txt.gz · Last modified: 2017/09/22 13:28 (external edit)

Page Tools